HTC Wildfire S is all so known as HTC PG76110 which runs on Android 2.3.5 and having 600 MHz ARM 11 processor and chipset of Qulacomm MSM7227. All the users of HTC Wildfire S can now root their phone. To root the device you need to custom recovery installed in the device.
Pre-Requisites
->Unlocked bootloader of HTC Wildfire S
->Custom recovery image
->ClockworkMod Recovery 5.0.2.6 (recommended)
->Custom recovery image
1.The battery power of the Smartphone must be 80% at least, so that it keeps the device active all through procedure.
2.You must keep backups of all data separately before rooting your device.
3.Disable the firewall and anti-virus software to avoid interruption.
4.Set microSD card to FAT32 file system.
How to flash custom recovery and root your HTC Wildfire S
Step 1: Download the above links on your computer and extract the files.
Step 2: Via USB cable connect your device to your computer and transfer the PG76IMG.zip file to the phone’s SD card.
Step 3: After that detach your Smartphone from the computer and disable the Fastboot on your phone by going to Settings then power.
Step 4: Now switch off the device and reboot it to HBOOT mode by both the Volume Down and Power buttons until the screen appears.
Step 5: Wait for few seconds to detect the recovery image by phone and then as you see the message to start update, use the volume up key to initiate update.
Step 6: Press the Power button to reboot the phone after the installation is complete.
Step 7: Use the USB cable to connect your device after it gets fully booted.
Step 8: From the phone’s SD card delete PG76IMG.zip file and copy the root.zip file.
Step 9: Again unplug the phone and turn off the device.
Step 10: Hold the Volume Down Key and Power buttons until you see HBOOT screen on phone. You must use the Volume keys for navigation and to select use Power button.
Step 11: In the recovery menu select install zip from sd card then select choose zip from sd card and finally select root.zip file.
Step 12: Confirm by selecting Yes and then the rooting procedure will start by script.
Step 13: When all get finished the go back to the main menu and then select power off.
Step 14: Power on the phone and enjoy the rooted HTC Wildfire S. Superuser, BusyBox, and su binary will also be installed along with it.
Your HTC Wildfire S is successfully rooted and installed with custom recovery. If you counter any error during Superuser app then clear all the data from it and afterwards run the application from the app drawer. It is advised to update su binary to prevent force close error in the app. You may also go for latest version of Superuser from the Google Play Store.
................................................................................
Keep Visiting :- www.indicyborg.blogspot.in
Pre-Requisites
->Unlocked bootloader of HTC Wildfire S
->Custom recovery image
->ClockworkMod Recovery 5.0.2.6 (recommended)
->Custom recovery image
1.The battery power of the Smartphone must be 80% at least, so that it keeps the device active all through procedure.
2.You must keep backups of all data separately before rooting your device.
3.Disable the firewall and anti-virus software to avoid interruption.
4.Set microSD card to FAT32 file system.
How to flash custom recovery and root your HTC Wildfire S
Step 1: Download the above links on your computer and extract the files.
Step 2: Via USB cable connect your device to your computer and transfer the PG76IMG.zip file to the phone’s SD card.
Step 3: After that detach your Smartphone from the computer and disable the Fastboot on your phone by going to Settings then power.
Step 4: Now switch off the device and reboot it to HBOOT mode by both the Volume Down and Power buttons until the screen appears.
Step 5: Wait for few seconds to detect the recovery image by phone and then as you see the message to start update, use the volume up key to initiate update.
Step 6: Press the Power button to reboot the phone after the installation is complete.
Step 7: Use the USB cable to connect your device after it gets fully booted.
Step 8: From the phone’s SD card delete PG76IMG.zip file and copy the root.zip file.
Step 9: Again unplug the phone and turn off the device.
Step 10: Hold the Volume Down Key and Power buttons until you see HBOOT screen on phone. You must use the Volume keys for navigation and to select use Power button.
Step 11: In the recovery menu select install zip from sd card then select choose zip from sd card and finally select root.zip file.
Step 12: Confirm by selecting Yes and then the rooting procedure will start by script.
Step 13: When all get finished the go back to the main menu and then select power off.
Step 14: Power on the phone and enjoy the rooted HTC Wildfire S. Superuser, BusyBox, and su binary will also be installed along with it.
Your HTC Wildfire S is successfully rooted and installed with custom recovery. If you counter any error during Superuser app then clear all the data from it and afterwards run the application from the app drawer. It is advised to update su binary to prevent force close error in the app. You may also go for latest version of Superuser from the Google Play Store.
................................................................................
Keep Visiting :- www.indicyborg.blogspot.in
0 comments:
Post a Comment